CleanStream HEPA Filter for Craftsman Wet Dry Vacuums (Red Stripe)

Replacement Filter for:

• Replaces Sears Filter 9-17816
• For Craftsman Red Stripe wet/dry vacuums

Filter Dimensions

• Height: 8 1/8 inches
• Diameter: 7 1/8 inches
• Inner Diameter: 4 3/8 inches

Characteristics

• HEPA: High Efficiency Particulate Air
• Filter easily cleaned by tapping-dirt falls away

Wet Dry Filter Installation Instructions

Remove old filter and clean sealing surface on lid. Carefully slide opening of filter over cage. Push bottom of filter firmly until gasket seats in channel on vac lid. Place enclosed rubber washer on the threaded post. Secure filter in place with existing filter nut. Do not over tighten. Do not use filter plate originally supplied with vac.

Original Sears Filter 9-17816

CleanStream Filter No. 09085

NOTICE Important: For liquid pick-up, do not fill above inlet or spillage will occur. Warning: DO NOT vacuum oily or hazardous materials such as asbestos, lead, pesticides or other health endangering materials. DO NOT vacuum burning objects, embers or warm fireplace debris. Warning: Remove plug from outlet before removing the tank cover. Wet Dry Filter Cleaning Instructions Clean installed filters by gently tapping outside of dust drum. Thorough cleaning requires removal of filter. In a well-ventilated area, tap metal end cap against a hard surface to remove debris. Wash remaining debris from pleats with running water. Completely dry filter after washing.